2 X 1.28GHZ MB/PS, 2GB MEM, XVR-600 GRAPHICS,73GB SCSI DISK, DVDROM. Monitor not included. The Sun Blade 2500 workstation can run up to two 1.6-GHz UltraSPARC IIIi processors, each with 1 MB of Level 2 cache integrated on die, four independent PCI bus segments, up to 16 GB of DDR ECC memory (2 CPUs required), up to two 146-GB, 10K RPM, Ultra SCSI internal hard drives, six full-length, 64-bit PCI slots (three at 66 MHz, three at 33 MHz). |
|
| Upgrade Options The following is a partial list of popular upgrade options including processors, disk, memory, Ethernet cards, SCSI fiber cards, and graphics cards that run in a Sun Blade 2500. 375-3044, Sun Blade 2500 Motherboard with 1 × 1.28GHz CPU (FRU) 375-3096, Sun Blade 2500 Motherboard with 2 × 1.28GHz CPUs (FRU) XRA-SC1CA-73G10K, 73.4GB - 10000 RPM Ultra-320 X5264A, 73.4GB - 10000 RPM Ultra-320 XRA-SC1CA-36G10K, 36.4GB - 10000 RPM Ultra-320 X3150A, Sun GigaSwift Ethernet UTP (Copper) X3151A, Sun GigaSwift Ethernet MMF (Fiber) X4150A, GigaSwift Ethernet UTP (GCS) X4151A, GigaSwift Ethernet MMF (GFS) X4444A, Quad GigaSwift Ethernet UTP (QGE) X7603A, 1GB DDR Memory Option, SPD 1.0 (2 × 512MB DIMMs) X7604A, 2GB DDR Memory Option, SPD 1.0 (2 × 1GB DIMMs) X7703A, 1GB DDR Memory Option, SPD 0.0 or 1.0 (2 × 512MB DIMMs) X7704A, 2GB DDR Memory Option, SPD 0.0 or 1.0 (2 × 1GB DIMMs) X4422A, Dual GigabitEthernet / Dual SCSI PCI Adapter X5010A, Single-Channel Single-Ended Ultra/Wide SCSI - PCI X6540A, Dual Single-Ended Ultra/Wide SCSI PCI X6541A, Dual Differential Ultra/Wide SCSI PCI X6758A, PCI Dual Ultra3 SCSI Host Adapter - LVD X6727A, PCI Dual FC Network Adapter SG-XPCI1FC-QF2, 2GB PCI Single FC Network Adapter SG-XPCI2FC-QF2, 2GB PCI Dual FC Network Adapter X3770A, XVR-100 Graphics Accelerator (64MB) X3780A, XVR-600 Graphics Accelerator X3685A, XVR-500 Graphics Accelerator X3689A, XVR-1200 Graphics Accelerator |
| If you need help with ordering or configuring your system call: © 2011 Ames Sciences, Inc. All rights reserved. |